|
Planet Power over Ethernet Extender/POE-E101
:: Detalle de Producto :: PLANET POE-E101 is a newly designed and simple device which extends both the
reach of Ethernet Data and IEEE 802.3af Power over Ethernet over
the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance.
Currently, PoE supported networking devices such as PoE IP Cameras, PoE Wireless
Access Points and PoE IP Phones have become the mainstream of network deployment
because of the convenience of easy installation regardless of additional power
supply. However, limited by the UTP cable specifications, only up to 100 meters
(328 ft.) cable could be applied for IP-based and PoE powered devices (PD)
installation. Therefore, the POE-E101 is designed as the repeater to forward
both Ethernet data and PoE power and thus range the PoE powered device
installation. By just plug and play but no additional power supply or set up
required, one single POE-E101 can increase the PoE range to 200m. By
daisy-chaining multiple PoE-E101s, it offers you great flexibility to extend the
distance of PoE network to triple, quadruple further in length or more.
• Complies with IEEE 802.3af Power over Ethernet
• Extends the range
of PoE an additional 100 meters (328ft.)
• Forwards both Ethernet data
and PoE power to remote devices
• Automatically detects and protects
PoE equipments from being damaged by incorrect installation
• Multiple units,
daisy-chain installation support
• No external power cable required for
installation
• Compact size, Wall-Mountable design
Providing PoE and Ethernet data extension ability, the POE-E101 is an ideal
solution for service providers, campuses and public areas networking application
which requires PoE deployment of wireless access points, IP-based surveillance
cameras or IP phones in any places. It enables you to centrally manage the power
from one location easily, efficiently and cost effectively.
Easy Cabling Installation
The POE-E101 PoE Extender
is quite easy to be installed by simple plug and play. It is used between a
Power Source Equipment (PSE) and the Powered Device (PD); it injects power to
the PD without affecting the data transmission performance. The POE-E101 offers
a cost effective and quick solution to doubles the standard range of PoE from
100 to 200 meters. There are 2 RJ-45 ports in a compact mini box of PoE
Extender, of which the IN port functions as "PoE (Data and Power) input" and the
other port on the other side functions as "PoE (Data and Power) output". The
"PoE OUT" port is also the power injectors which transmit DC Voltage to the
Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD.
Is 100 meters cable long enough to meet a wide range of IP Surveillance
deployment? The answer is certainly not. To apply the benefits of IP
Surveillance and also to achieve long-distance IP Camera distribution, the PoE
extender- POE-E101 is a quick and cost-effective option besides by adopting a
PoE Injector or PoE Ethernet Switch equipped with fiber optical interface. In
the simplest application, a POE-E101 enables a PoE IP camera to be installed up
to 200 meters away from a PoE Injector. The PoE Injector delivers PoE power over
the first 100 meters to the POE-E101 over UTP cable, and then the POE-E101
forwards the Ethernet data and remaining POE power to the PoE IP camera. The
POE-E101 does not require an external power supply and can be installed easily
by just plug and play; that means the operator does not need to configure the
POE-E101.
When being used in Wireless LAN implementations, the POE-E101 enables Wireless
Access Points to be connected using standard Cat5e/6 cable over 100 meters from
the Power Source Equipment (PSE), such as PoE Switch, PoE Injector Hub and
single port PoE injector. The POE-E101 is also powered by the incoming PoE on
the Ethernet cable and does not require an external power feed. The POE-E101
shall reduce the usage of cables and eliminate the need of dedicated electrical
outlets on the wall, ceiling or any unreachable place. It frees the Security IP
Cameras and wireless APs deployment from restrictions of power outlet locations.
| Model |
POE-E101 |
| Interfaces |
| LAN IN |
1 x 10/100Base-TX Ethernet with IEEE 802.3af PoE “Data + DC” in
Auto
MDI/MDI-X, Auto-Negotiation RJ-45 connector |
| LAN OUT |
1 x 10/100Base-TX Ethernet with IEEE 802.3af PoE “Data + DC” out
Auto
MDI/MDI-X, Auto-negotiation RJ-45 connector
|
| Power over
Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet |
| PoE Power Supply Type |
Mid-Span / Type B |
| PoE Power Output |
48V DC, 270mA, Max. 13Watts |
| Power Pin Assignment |
4/5(+), 7/8(-) |
| Maximum Distance |
Class 1 (3.8 Watts): 300m
Class 2 (6.5 Watts): 300m
Class 3 (12.9
Watts): 200m
Non-PoE (Data): 300m |
| Hardware
Specification |
| Data Rate |
10/100Mbps |
| Switch Architecture |
Store-and-Forward |
| Switch Throughput |
148810pps@64Bytes |
| Latency |
7.840µs |
| Maximum Frame Size |
1552Bytes |
| Flow Control |
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for
Full-Duplex
|
| LED Indicators |
1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green) |
| Protection |
ESD(Ethernet): 6KV
Surge (EFT for power) : 6KV |
| Dimension (W x D x H) |
94 x 70 x 26 mm |
| Weight |
215g |
| Power Requirement |
IEEE 802.3af compliant with voltage within 44V-56V DC |
| Power Consumption |
2Watts (maximum) |
| Mechanical |
Metal / Wall Mountable and optional DIN-Rail kit for installation |
| Cable |
TIA / EIA-568, Category 5/5e cable |
| Standards
Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standard Compliance |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 10/100Base-TX Fast
Ethernet
IEEE 802.3af Power over Ethernet PSE / Mid-Span
IEEE 802.3af
Power over Ethernet PD / Mid-Span
IEEE 802.3x Flow Control
|
| Environment |
| Operating |
Temperature: -10 ~ 60 Degree C
Relative Humidity: 0 ~ 95%
(non-condensing)
|
| Storage |
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
|
|
Destacados
