|
Planet Switch L2/L4 50-Port Gigabit + 4-Port
Gigabit SFP/WGSW-50040 :: Detalle de Producto :: The PLANET WGSW-50040 is a Layer 2
managed Gigabit Switch that provides high density performance and is rack
mountable. With 100Gbps switching fabric, the WGSW-50040 can handle extremely
large amounts of data in a secure topology linking to an enterprise backbone or
high capacity servers. The powerful QoS and Network Security features make the
WGSW-50040 to perform effective data traffic control for ISP and Enterprise
VoIP, video streaming and multicast applications.
 Physical Port
•
50-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
• 4 mini-GBIC/SFP slots,
shared with Port-45 to Port-48
• RJ-45 to DB9 console interface for Switch
basic management and setup
IP Stacking
• Connects with
stack member via both Gigabit TP/SFP interface
• Single IP address
management, supports up to 24 units stacking together
Layer 2
Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z Gigabit Ethernet standards
• Supports Auto-Negotiation and
Half-Duplex / Full-Duplex modes for all 10Base-T/100Base-TX and 1000Base-T
ports
• Supports 1000Base-SX/LX for all SFP interface
• Auto-MDI / MDI-X
detection on each RJ-45 port
• Prevents packet loss Flow Control:
- IEEE
802.3x PAUSE Frame flow control for Full-Duplex mode
- Back-Pressure Flow
Control in Half-Duplex mode
• High performance Store and Forward
architecture, broadcast storm control, port loopback detect
• 8K MAC address
table, automatic source address learning and ageing
• Supports VLAN
-
IEEE 802.1Q Tag-Based VLAN
- GVRP for dynamic VLAN Management
- Up to 4K
VLANs groups, out of 4041 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support
(IEEE 802.1ad)
- Private VLAN Edge (PVE) supported
- GVRP protocol for
Management VLAN
• Supports Link Aggregation
- Maximum 8 trunk groups, up
to 8 ports per trunk group
- IEEE 802.3ad LACP (Link Aggregation Control
Protocol)
- Cisco ether-channel (Static Trunk)
• Spanning Tree
Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- RSTP,
IEEE 802.1w (Rapid Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple
Spanning Tree Protocol, spanning tree by VLAN)
- Supports BPDU & port
guard
• Port Mirroring to monitor the incoming or outgoing traffic on a
particular port (many to many)
• Provides Port Mirror
(many-to-1)
Quality of Service
• 8 priority queues on all
switch ports
• Supports for strict priority and Weighted Round Robin (WRR)
CoS policies
• Traffic classification
- IEEE 802.1p CoS / ToS
- IPv4
/ IPv6 DSCP
- Port-Based QoS
• Strict priority and Weighted Round Robin
(WRR) CoS policies
Multicast
• Supports IGMP Snooping v1,
v2 and v3, MLD v1 and v2 snooping
• Querier mode
support
Security
• IEEE 802.1x Port-Based network access
authentication
• MAC-Based network access authentication
• Built-in
RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
•
TACACS+ login users access authentication
• IP-Based Access Control List
(ACL)
• MAC-Based Access Control List
• Supports DHCP Snooping
•
Supports ARP Inspection
Management
• Switch Management
Interface
- Console / Telnet Command Line Interface
- Web switch
management
- SNMP v1, v2c, and v3 switch management
- SSH secure
access
• BOOTP and DHCP for IP address assignment
• Firmware upload /
download via TFTP or HTTP protocol for IPv4 and IPv6
• SNTP (Simple Network
Time Protocol) for IPv4 and IPv6
• User Privilege levels control
• Syslog
server for IPv4 and IPv6
• Four RMON groups 1, 2, 3, 9 (history, statistics,
alarms, and events)
• Supports Ping, Trace route function for IPv4 and
IPv6
• Management IP for IPv4 and IPv6
|
Destacados
